Before Installation
Identify the chain and machine. Use the approved instructions for that exact chain and equipment.
Home/Installation & Maintenance
Fitment and care
Tire Protection Chain Installation & Maintenance
Correct positioning, secure closures and machine clearance should be checked before use and during routine operation. Follow the approved instructions for the exact chain and machine.
Installation checks
Check the fit before regular operation
This is a general fitment checklist, not an installation manual. The approved chain and machine instructions control the actual procedure.
Position & Closures
Lay out the chain, centre the tread mesh and connect the specified closures as instructed.
Clearance & Tension
Check the side-chain position, closures, tension and clearance to nearby machine parts.
Low-Speed Recheck
Conduct the approved low-speed trial, stop and check seating and side clearance again before regular operation.
Routine maintenance
What to inspect in service
Inspect the chain regularly according to the instructions supplied for the actual assembly and the equipment operator's procedures.
Position and tension
Look for a shifted tread mesh, loose side chains or contact with the machine.
Rings and closures
Check for broken, displaced or loose connecting parts.
Wear face
Look for abnormal wear and exposed tire areas.
Safety note
If damage is found, stop and assess it
Identify the affected part and follow the approved repair guidance for the exact chain. Do not substitute an unconfirmed component or continue operation with a damaged assembly.
Replacement parts
Need Replacement Chain Parts?
Send us a clear photograph of your chain, the damaged component and the quantity required. Our team will help confirm suitable replacement parts.